It’s summertime, and that means one thing: you’re most likely taking lots of baths or showers. And if you’re like me, then you want to save water when using the bathtub or shower. Here are 8 ways for how to save water during your bathing experience!
1. Turn off the water when you’re soaping up.
This may sound silly, but it will actually save a lot of water when you turn off the faucet when soaping up. You’ll still get plenty of water for rinsing after you’re finished!
This is also good because it prevents excessive usage of soap – if your hands are covered in soap already, there’s no need to keep rinsing them off under the faucet!
2. Take shorter showers.
If you’re like me, then you probably love to take long showers (especially when it’s cold outside). Try taking showers that are shorter than usual.
You’ll save water! You’ll also be able to get ready faster in the morning, which is always a plus.
Taking shorter showers is also good for your skin because it won’t get dried out from being in the shower for extended periods of time.
And let’s be honest – do you really need that much time in the morning? This trick will help save water when taking a bath or shower!
You can use a timer to remind yourself that it’s time to get out of the shower.
3. Take cold showers.
Cold showers wake you up and give your skin a healthy glow. It’s also been proven to reduce depression symptoms!
Instead of taking a hot shower, take a cold one instead. But be careful – it might be shocking at first! A great way to get used to the cold water is to start out by taking a lukewarm shower and then turning down the heat from there.
It’s good for the environment, and it can also help you cool off on hot days.
You’ll save water and have a great time doing so! Plus, it’s also better for your skin – hot showers can dry out your skin whereas cold ones help with healthy hydration.
4. Shower early in the morning or late at night instead of during peak hours.
Peak hours tend to be between 8-10 a.m when people are getting ready for work or school, and then again at around 6-8 pm in the late afternoon.
If you are taking a shower during those times, then chances are your water bill will end up being higher than usual because everyone is home and using their showers at that time! Try changing when you take a shower – like earlier in the morning or later in the evening after everyone has gone to sleep.
It’s a simple solution for how to save money on your water bill!
5. Try not to take baths unless it’s necessary.
Baths tend to use more water than showers because you’re completely immersing yourself in the bath. Try to avoid taking baths as much as possible, and take a shower instead if it’s not an emergency that requires a bath!
This is also good for your skin – too many baths can dry out your skin, so try taking a shower instead.
Moreover, baths can’t really be shortened – if you’re in a bath, then there’s no turning the water off to save some water!
6. Use your shower head sparingly – don’t let it spray down on full-blast for too long at one time.
Your showerhead probably has multiple settings, which are helpful for getting the right amount of water pressure throughout your body while you’re taking a shower.
Try to only use high-pressure water when it’s really necessary – like rinsing shampoo out of your hair! Otherwise, try using lower pressure or no spray at all if possible.
7. Consider using a low-flow showerhead to save more water while still getting clean
Speaking of showerheads, using a low-flow showerhead is another way to save water while still getting clean!
Low-flow showerheads are great because they use less water than traditional ones. This means that you’re saving more money on your bill at the end of the month!
Plus, it’s not really noticeable when you use them. You can still get clean and take a long shower with these types of showerheads!
8. Fill up your tub with cold water before adding hot to save energy costs on heating it up.
Doing this will ensure that you use less hot water when taking a bath, which means more money in your pocket. This is also great for the environment – especially if you live in an area where heating up water uses lots of electricity!
If possible, try using cold water to take baths instead of warm or hot ones since it saves energy costs.
Although, if it’s just too cold to bear then feel free to warm the water up a bit! Just know that you’re still saving money by using less hot water than normal.
9. Fill your bathtub halfway instead of all the way.
This is a pretty simple trick to save water when taking a bath or shower – just fill your tub halfway instead of filling it up entirely!
You’ll still get soaked and clean while preventing yourself from wasting extra water that you don’t need in order to take a soak. Plus this method will help keep your water bill down – and who doesn’t like saving money?
10. Take a Sponge Bath instead of a traditional bath or shower.
If you’re on a tight budget or just want to conserve water, then this is the method for you!
Sponge baths are great because you’re only using a small amount of water in order to get clean.
This means that you can easily take one without wasting too much water and it won’t break the bank either! If possible, try taking sponge baths as often as you can or when necessary instead of traditional showers or baths.
Sponge baths are also great for people who can’t stand being dirty!
Fill a bucket with water and use it to wash yourself instead of using the shower or bath.
If you don’t have access to a shower, then filling up a bucket with water from the sink is another great option for getting clean.
This method also saves money on your bill because less hot water is being used.
11. Use a Shower Bucket to recollect the water.
Shower buckets are a great option for saving water when taking a shower.
All you have to do is place the bucket in your tub before getting into it and let it collect all of the water from washing yourself!
You can then use the water in the bucket to flush toilets and give your plants a drink.
This is a great way to save water because you’re not wasting it down the drain. Instead, you’re recycling it and using it again!
Conclusion
Taking a shower or bath can be relaxing, but it’s important to remember that you’re using water – which is something everyone needs more of! Luckily, there are lots of simple ways to conserve water when taking these bathing methods. Try out some of our suggestions for saving the most amount of water possible every time you wash up!
